The multi-function DPL beauty machine is a device purchased by many beauty salons. Of course, many people will ask about the operation. Before the operation, prepare all the items needed for theoperation, such as small bowls, scrapers, absorbent cotton, and gel.
(1) Use the bald head care process
1. Fill in the form
Fill out the customer file form in detail, confirm the care items, and ask the customer to fully understand all the skin reactions before and after the care and the matters that should be paid attention to after the care.
2. Cleansing
Facial cleanse (three minutes) with a gentle cleanser. Reminder: Before the operation, the beautician should take care of the bald head with both hands and instruments, and the sterility during the operation.
3. Preheating
Turn on the instrument after cleansing, and preheat the instrument for at least three minutes without turning on the light. Purpose: to fully circulate the water in the water pipe, so as to avoid the phenomenon of bald gun burning caused by the poor circulation for many times, and the operation is stable.
4. Shaving
Shave off excess facial hair, forehead, eyebrows, temples, cheeks, lips and other hair. (two minutes) Purpose: The hair is black, and the black will absorb part of the light during the operation, so the light absorbed by the skin will be reduced, and the nursing effect will be reduced: the process of absorbing the light by the black hair will increase the tingling feeling of the care recipient, so Shave the hair to avoid tension; if you don't shave the hair, the small hairs that have absorbed the light will remain in part of the heat of the skin epidermis, which may increase the sensitivity of the skin, so the hair should be shaved off.
5. cooling gel
Evenly apply a 1-3mm thick cooling gel on the treatment area (two minutes). If you do a hair removal , you need to shave the hair first and then apply the cooling gel.
Function: Cold gel is a light guide agent, which has the functions of calming, cooling and light guiding. The cold gel is forbidden to be used repeatedly, and it should be discarded after use.
Contraindications: Avoid eyes, eyebrows, lips when applying cold gel, these are prohibited areas.
6. Eye protection
Ask the care recipient to close the eyes tightly and cover the eyes with a damp cotton pad or professional eye patch.
Function: To prevent the care recipient from seeing the strong light and be nervous, and play a soothing role.
7. Test sensitivity
Adjust the parameters to make two to three light spots at the base of the ear and observe for three minutes.
Function: If allergic phenomenon occurs, please stop the operation.
8. Operation
The recall is suitable for the care recipient to perform an orderly manipulation of the parameters. (about twenty minutes)
Notice:
8.1 Before the operation, inform the care recipient that there is a slight heat sensation, so as not to panic.
8.2 When operating, start from the value, adjust while doing it, and ask the care recipient how they feel at any time.
8.3 The light spots should be arranged closely from bottom to top, one third of each other. If the parameters are suitable,
It is forbidden to repeatedly irradiate a certain part. The heat accumulation generated by repeated irradiation can directly cause skin redness and burns;
8.4 The bald head should fit the skin vertically, and should not be pressed too tightly or leave the skin (called virtual contact). Virtual contact can (avoid) cause serious skin reactions after nursing.
8.5 During the operation, the changes of the skin should be observed at any time. One should listen to the second to see, one is to listen to the patient to reflect the degree of skin tingling, and the other is to see the change of the patient's skin, and the parameters can be exchanged at any time according to these two points. (The parameters to be adjusted when caring for various skin problems are different from the feeling of the recipient's skin, please refer to the parameter comparison table for details)
9. Apply face
After the operation, leave the cooling gel on the face about 20 minutes. If the reaction is large after the treatment, the redness lasts for a long time and can be applied to the face with cold water or ice water until it is not red.
10. Cleaning
Wash the cooling gel on the treatment area with cool water and apply the treatment to improve the product.
The above is the use process of DPL beauty machine. If you want to know more information about Beijing FS Laser company machines , please feel free to pay attention to +8613131271093 ( You can add WhatsApp).
